10/30/2011

MD Building Products 4283 Shrink & Seal Indoor Window Kits Review

MD Building Products 4283 Shrink and Seal Indoor Window Kits
Average Reviews:

(More customer reviews)
We have a basement family room that was very drafty and cold. You could actually feel the cold coming off of the windows even with the blinds and curtains. In order to be comfortable we would have to turn the heat up to 75. We can't afford to replace the sliding door and windows right now so I found this at a local home improvement store and thought for less then $10 I'll give it a try.
It took me an hour to put up by myself. I highly recommend 2 people if possible. The directions on the box are easy to follow and are accurate in my opinion. Clean the entire door and frame thoroughly and make sure it's dry. Doing that will help the adhesive tape stick. You may have issues installing this if it is really cold too. The directions recommend about 40F I think. Don't rush when applying the plastic to the tape. Start in one corner and work over from there. It was easier for me to do the left side of the sliding door first then the right. The plastic doesn't have to be very tight across the door. When you heat it the excess will go away. If the plastic comes off the tape just press it back on. It's not supposed to stick too much right away just in case you need to adjust the plastic. When you start heating it, the adhesive will activate. Don't forget to keep an extra 2 inches of shrink past the tape. I guess you can figure out why...it shrinks. The directions said to hold the blow dryer a few inches from the plastic. My blow dryer must be extra hot because it was about 4 inches away and it made a hole in the top of the door. That being said, it may be a good idea to start further away and at the top just in case this happens to you. Don't hold the blow dryer on one spot for too long either. Once you start you'll realize it goes pretty quickly. The taping process took much longer then the actual shrinking. Also, if the plastic gets little wrinkles as you're shrinking, just go back over that spot and it will go away.
The plastic looks clear and you can't tell it's there unless you are up close to the door. We have 2 cats and 2 kids and it's been on for a month without any major issues. My oldest ripped it a little at the door handle so I had to patch it with the leftover shrink. I gave this 4 stars because I think the tape could have been a little better. Also, we cannot use our sliding door. I honestly didn't think about it until after it was on. There may be a way to put it on and still use it but we have other doors. I'll trade not using the door for a warmer family room and cheaper electric bill. I plan on using this again next year. I am going back to get the window kit. We are much more comfortable now and don't have to wear 5 layers just to watch TV.(smile) I recommend trying this product for those cold winter months.

Click Here to see more reviews about: MD Building Products 4283 Shrink & Seal Indoor Window Kits



Buy NowGet 36% OFF

Click here for more information about MD Building Products 4283 Shrink & Seal Indoor Window Kits

No comments:

Post a Comment